Flash firmware


Flash firmware on a hardware using the flash tool according to the following configuration.(The flashing address corresponds to the compiling address one by one.)

File Address
bootloader.bin 0x1000
partition-table.bin 0x8000
lvgl-demo.bin 0x10000

Note: For ESP32-C3, the flashing address of bootloader.bin is 0x00.


Based on openwrt:Flash the demo on the development board directly and run it.

Based on Linux: You need to save the font file 8ms.ttf in the /usr directory of the development board, and then execute the demo.

文档更新时间: 2021-08-06 10:57   作者:plj